RK7305Y Medical Ground Bond Tester

Rk7305 grounding resistance tester is used to measure the grounding resistance inside electrical equipment.

Output voltage: 6Vac MAX

Output frequency: 50Hz / 60Hz optional

Output current: 3-30Aac constant current source

Send email to us Product Manual

Description

Parameter

Accessories

Video

Rk7305Y grounding resistance tester
Product introduction

Rk7305 grounding resistance tester is used to measure the grounding resistance inside electrical equipment. It reflects the (contact) resistance between the exposed conductive parts of electrical equipment and the total grounding terminal of electrical equipment.

This product meets the requirements of GB 4706.1 – 2005 and GB 9706 1 – 2007 and other safety regulation standard tests meet the requirements of JJG 984 – 2004 safety regulation metrological verification regulation.

Application field

1. Household appliances: TV, refrigerator, air conditioner, washing machine, dehumidifier, electric blanket, charger, etc

2. Transformer: oscilloscope, signal generator, DC power supply, switching power supply and other complete machines

3. Medical equipment: all kinds of new medical instruments and medical supporting instruments, heart monitoring, medical imaging, biochemical analysis instruments, sphygmomanometers, thermometers and other home medical equipment

4. Lighting industry: ballast, road lamp, stage lamp, portable lamp and other lamps

5. New energy vehicles: electric vehicle battery pack connection bridge, cell connection resistance

6. Electronic components: diodes, triodes, high-voltage silicon stacks, various electronic transformers, connectors, high-voltage electrical appliances

7. Electric heating appliances: electric drill, pistol drill, cutting machine, grinder, electric welding machine, etc
1. Constant current linear amplification output

2. Front panel software calibration

3. Keyboard locking function

4. Rk7305 and rk7122 are connected to form two in one withstand voltage grounding and three in one withstand voltage insulation grounding tester, which is convenient and flexible

Previous: RK9930Y/RK9930AY/RK9930BY MEDICAL GROUND RESISTANCE TESTER

Next: RK2671DM Withstand Voltage Tester

Item, eye	instrument for drawing circles	rattle
Electricity, flow	Set range: AC 3- -30Amps resolution: 0. lAmp / stepAccuracy: ± (2% set point + 0.02A)
Electricity, pressure	Range: AC 6V Maxo (open-circuit voltage)
Frequency, rate	50 / 60Hz optional accuracy: ±I00PPM
Wave, shape	sinusoidal wave
ammeter	Measurement range: 3- -30A Resolution: 0. lA / stepAccuracy: ± (2% reading + 0. 1A)
ohmmeter	Measurement range: 0- -510mQ, 0- -120m when the output current is 10A, and when the output current is 10- -30AResolution: lm Ω / stepAccuracy: ± (2% reading + l m Ω)
calculagraph	Timing range: 0- -999.9 seconds resolution: 0. lS / stepAccuracy: ± 50 ms
	Offset mode: automatic or manual
Milliohmoffset	Maximum Offset range: 100 mΩ Max.
setting	Resolution: lm Ω / step
	Accuracy: ± (2% Setpoint + M Q)
Determining value setting	Upper limit of resistance setting range: 0-510mQ resolution: lm Ω / step accuracy: ± (2% setting + lm)
Test time setting	Set range: 0. 5- -999.9 seconds resolution: 0. 1S / stepAccuracy: ± (0. 01% + 50m s)

Model	Picture	Type	Summary
RK00005		Standard	The Instrument Is Equipped With Grounding Test Clamp As Standard, Which Can Be Purchased Separately.
RK20		Standard Configuration	The Instrument Is Equipped With DB9 As Standard, Which Can Be Purchased Separately.
RK00001		Standard	The Instrument Is Equipped With National Standard Power Cord, Which Can Be Purchased Separately.
Certificate And Warranty Card		Standard	The Instrument Is Equipped With Standard Certificate And Warranty Card.
Factory Calibration Certificate		Standard	Calibration Certificate Of Standard Equipment.
Instructions		Standard	The Instrument Is Equipped With Standard Product Instructions.