I-RK9974-10 / RK9974-20 / RK9974-30 / RK9974-50 I-Programmable Auto Safety Tester AC DC
I-RK9974-10 I-Programmable Ultra High Voltage Tester
incazelo yomkhiqizo
Lolu chungechunge lwabahloli be-ultra-high voltage olulawulwa uhlelo luklanyelwe ukuhlinzeka ngokuhlolwa kwamandla kagesi aphezulu kanye nokuhlaziywa kwama-optocouplers ane-voltage ephezulu, ama-relay ane-voltage ephezulu, amaswishi anamandla kagesi aphezulu, amamojula e-PV namanye amadivaysi anokumelana nokushisa okuphezulu.I-MCU enesivinini esikhulu kanye namasekhethi edijithali amakhulu asetshenziswa.Umhloli wokuphepha osebenza kahle kakhulu,
Ubukhulu be-voltage ephumayo, ukunyuka nokuwa kwe-voltage ephumayo, kanye nemvamisa ye-voltage ephumayo kulawulwa ngokuphelele yi-MCU, engabonisa inani lamanje lokuqhekeka kanye nenani le-voltage ngesikhathi sangempela, futhi inokulawula okukude okungenantambo. umsebenzi, ifakwe PLC, RS232C, RS485, USB, LAN interface,
Kulula ukwenza uhlelo lokuhlola oluphelele ngekhompyutha noma uhlelo lwe-PLC.Ingakwazi ukukala ngokushesha nangokunembile ukuphepha kwemishini yasendlini, amathuluzi, izinto ezikhanyisayo, amathuluzi okushisa kagesi, amakhompyutha, kanye nemishini yolwazi.I-sine wave edingekayo ukuze kuphume i-voltage ephezulu ikhiqizwa isimiso se-DDS, futhi ubuchwepheshe bempendulo engalungile busetshenziselwa ukwenza i-waveform ephumayo ibe msulwa futhi izinze.
Inkambu yohlelo lokusebenza
Izingxenye: ama-diode, ama-triode, izitaki ze-silicon eziphakeme kakhulu, iziguquli ezihlukahlukene ze-elekthronikhi, izixhumi, ama-capacitor aphezulu-voltage, njll.
Izinto zikagesi zasendlini: omabonakude, iziqandisi, ama-air conditioner, imishini yokuwasha, okokukhipha umswakama, izingubo zokulala zikagesi, amashaja, njll.
Izinto zokuvikela: imikhono eshwabene nokushisa, amafilimu e-capacitor, imikhono yamandla kagesi aphezulu, iphepha le-insulating, amagilavu avikelayo, ukufudumeza kukagesi namathuluzi kagesi, izinsimbi, njll.
Ukuhlolwa kwe-voltage ephezulu, i-optocoupler yama-voltage aphezulu, ukudluliselwa kwamandla kagesi aphezulu, ukushintshwa kwamandla kagesi aphezulu, imoto yamandla entsha, njll.
Izici zokusebenza
1. Usebenzisa i-7-inch TFT (800*480) ukuze ubonise amapharamitha wokusetha nemingcele yokuhlola, okuqukethwe kwesibonisi kudonsa amehlo futhi kucebile.
2. Ingakopishwa futhi ikopishwe nge-U disk
3. Isikhathi sokukhuphuka nokwehla kwamandla kagesi aphezulu okulungisekayo, esingajwayelana nezidingo zezinto ezihlukene zokuhlola
4. Imiphumela yokuhlolwa ingagcinwa ngokuhambisanayo
5. Isixhumi esibonakalayo sokusebenza komuntu, ukusekela okokufaka okuqondile kokhiye bedijithali, okokufaka kokudayela nokusebenza kulula kakhulu
6. Isixhumi esibonakalayo sokusebenza kwezilimi ezimbili zesiShayina nesiNgisi, ukuzivumelanisa nezidingo zabasebenzisi abahlukene
7. Isixhumi esibonakalayo se-PLC esijwayelekile, isixhumi esibonakalayo se-RS232, isixhumi esibonakalayo se-RS485, isixhumi esibonakalayo se-USB
| Amamodeli wepharamitha | I-RK9974-10 | I-RK9974-20 | I-RK9974-30 | I-RK9974-50 | |
| I-ACW | Ibanga le-voltage yokuphumayo | (0.10–10.00)kV | (0.50–20.00)kV | (1.00–30.00)kV | (1.00–50.00)kV |
| esiphezulu(amandla)okuphumayo | 200VA(10.0kV 20mA) | 400VA(20.0kV 20mA) | 600VA(30.0kV 20mA) | 1000VA(50.0kV 20mA) | |
| Isilinganiso esiphezulu samanje | 20mA | ||||
| khipha i-waveform | I-Sine-wave DDS + isikhulisi samandla | ||||
| I-DCW | Ibanga le-voltage yokuphumayo | (0.10–10.00)kV | (0.10–20.00)kV | / | |
| esiphezulu(amandla)okuphumayo | I-100VA(10.0kV 10mA) | 200VA(20.0kV 10mA) | |||
| Isilinganiso esiphezulu samanje | 10mA | ||||
| I-voltmeter | ububanzi | I-AC (0.10–10.00)kV | I-AC (0.10–20.00)kV | I-AC (0.00–30.00)kV | I-AC (0.00–50.00)kV |
| ukunemba | ± (1% + 3 amagama) | ± (2% + 5 amagama) | |||
| iphutha lokucaciswa | |||||
| i-ammeter | ububanzi bokulinganisa | I-AC 0～20mA | |||
| ukunemba kwesilinganiso | ± (1% + 3 amagama) | ± (2% + 5 amagama) | |||
| imitha yesikhathi | ububanzi | 0,0.-999.9S OFF=ukuqhubeka | |||
| ukulungiswa okuncane | 0.1S | ||||
| isikhathi sokuhlola | 0.0S-999S OFF=ukuhlolwa okuqhubekayo | ||||
| Ukutholwa kwe-arc | 0-20mA | ||||
| imvamisa yokuphumayo | 50Hz/60Hz | ||||
| izinga lokushisa lokusebenza | 0-40℃ ≤75%RH | ||||
| imfuneko yamandla | 110/220±10% 50Hz/60Hz±3Hz | ||||
| esibonakalayo | Okujwayelekile nge-RS232, RS485, USB, PLC, i-LAN yokuzikhethela | Okujwayelekile kufakwe i-RS232, RS485, USB, PLC, isilawuli kude esingenantambo, i-LAN ozikhethela yona | Okujwayelekile kufakwe i-RS232, RS485, USB, PLC, isilawuli kude esingenantambo, i-LAN ozikhethela yona | Okujwayelekile kufakwe i-RS232, RS485, USB, PLC, isilawuli kude esingenantambo, i-LAN ozikhethela yona | |
| Umsebenzi wokulawula kude okungenantambo | no | yebo | |||
| isikrini | 7 Intshi TFT 800*480 | ||||
| Ivolumu yokubukeka (D×H×W) | 570×155×440 mm | 440×135×485 mm | 440×135×485 mm | 440×135×485 mm | |
| isisindo | Cishe 30.2KG | Cishe 78KG | Cishe 80KG | Cishe 85KG | |
| Izesekeli ezijwayelekile ezingahleliwe | Ikhebula lamandla RK00001, RS232 ikhebula lokuxhumana RK00002, RS232 vula ikhebula le-USB RK00003, USB turn square port cable RK00006,16G U disk (manual), wire interface transfer drive disc, RK26003A test line, RK26003B high voltage bar, RK8N | ||||
| Khetha izesekeli | I-RK00031 USB kuya ku-RS485 umama we-serial port line isigaba sezimboni sokuxhuma umugqa ongamamitha angu-1.5 ubude, umshini ongaphezulu
| ||||
| Amapharamitha / amamodeli | I-RK9974-10 | Inguqulo ye-RK9974-10Custom | |
| AC | Ibanga le-voltage yokuphumayo | (0.10～10.00)kV | |
| esiphezulu(amandla)okuphumayo | 200VA(10.0kV 20mA) | ||
| Isilinganiso esiphezulu samanje | 20mA | ||
| khipha i-waveform | I-Sine-wave DDS + isikhulisi samandla | ||
| DC | Ibanga le-voltage yokuphumayo | (0.10～10.00)kV | |
| esiphezulu(amandla)okuphumayo | I-100VA(10.0kV 10mA) | ||
| Isilinganiso esiphezulu samanje | 10mA | ||
| IR | i-voltage ephumayo | / | 0.10KV-5.0KV ±(1%+5个字） |
| Ukulungiswa kwe-voltage | 1V | ||
| Ukunemba kokuhlolwa kwe-voltage | ±(2.0%amazwi+2V） | ||
| Umkhawulo ophumayo wamanje | 10mA | ||
| esiphezulu(amandla)okuphumayo | I-10VA(1000V/10mA) | ||
| Amagagasi (1KV) | ≤3%(1KV awukho umthwalo obukhoma） | ||
| Ibanga lokulinganisa ukumelana | ≥500V 0.1MΩ-1.0GΩ±5% 1.0G-50.0GΩ ±10% 50.0GΩ-100.0GΩ ±15%＜500V 0.10MΩ-1.0GΩ ±10% 1.0GΩ-10.0GΩ ±15% | ||
| imodeli | isithombe | uhlobo | Uhlolojikelele |
| I-RK8N+ |  | Okujwayelekile | Ithuluzi liza elijwayelekile eline-cross uncontrolled high pressure rod, engathengwa ngokuhlukana. |
| I-RK26003A |  | Okujwayelekile | Ithuluzi liza elijwayelekile nesiqeshana sokuhlola i-voltage, esingathengwa ngokuhlukana. |
| I-RK26003B |  | Okujwayelekile | Ithuluzi liza elijwayelekile nesiqeshana saphansi esimelana nokucindezela, esingathengwa ngokuhlukana. |
| RK00002 |  | Okujwayelekile | Ithuluzi liza elijwayelekile nekhebula le-serial port ye-RS232, elingathengwa ngokuhlukana. |
| RK00001 |  | Okujwayelekile | Ithuluzi liza elijwayelekile nentambo yamandla kazwelonke ejwayelekile, engathengwa ngokuhlukana. |
| Isitifiketi Sesiqinisekiso Sekhadi Lesiqinisekiso |  | Okujwayelekile | Ithuluzi liza nesitifiketi sokuvumelana nekhadi lewaranti njengokujwayelekile. |
| Isitifiketi Sokulinganiswa Kwemboni |  | Okujwayelekile | Ithuluzi liza elijwayelekile nesitifiketi sokulinganiswa komkhiqizo. |
| imanuwali |  | Okujwayelekile | Ithuluzi liza nemanuwali yemiyalelo yomkhiqizo njengokujwayelekile. |
| Isofthiwe ye-PC | Lapho uthenga umshini, uma kukhona inketho, yibeke ku-U disk manual | Okujwayelekile | Ithuluzi liza elijwayelekile nediski engu-16G U (okuhlanganisa nesofthiwe yekhompyutha ephethe). |
| RS232 kuya kukhebula le-USB |  | Okujwayelekile | Ithuluzi liza elijwayelekile nentambo engu-RS232 eya ku-USB (ikhompyutha yokusingatha). |
| Ikhebula le-USB lembobo yesikwele |  | Okujwayelekile | Ithuluzi liza elijwayelekile nekhebuli yembobo ye-USB-to-square (ikhompyutha yokusingatha). |
| shayela idiski |  | Okujwayelekile | I-interface yekhebula lensimbi idluliselwa ku-CD yomshayeli, engathengwa ngokuhlukana. |
| RK00031 |  | Ongakukhetha | Ithuluzi lifakwe i-USB kuya ku-485, futhi umugqa wokuxhuma 1.5 amamitha ubude angathengwa ngokwehlukana. |
