Low price for Dielectric Withstand Tester - RK9966/RK9966A/RK9966B/RK9966C Photovoltaic Safety Comprehensive Tester – Meiruike

product description
The withstand voltage of this series of testers, the output voltage of insulation test, and the output current of grounding resistance test are all controlled by negative feedback circuit. During the test, the tester can automatically adjust to the voltage value (current value) set by the user.
The photovoltaic safety comprehensive tester is displayed on a 7-inch TFT LCD screen. The sine wave voltage required for the AC withstand voltage test and the sine wave current required for the grounding test are generated by using a DDS+ linear power amplifier to drive the output.

The output waveform is pure and the distortion is small. The tester adopts high-speed MCU and large-scale digital circuit design, and its output voltage, frequency, and voltage rise and fall are completely controlled by MCU;

It can display the breakdown current value and voltage value in real time; it is very easy to set up and operate, and provides PLC remote control interface, RS232C, RS485, USB and other interfaces, which can be easily combined into a comprehensive test system by users

The transient sensitivity of the power supply meets the requirements of GB6833.4. Conduction sensitivity is in accordance with the requirements of GB6833.6. Radiation interference is in accordance with the requirements of GB6833.10.

Household appliance standards (IEC60335, GB4706.1-2005), lighting standards (IEC60598-1-1999, GB7000.1-2007), information standards (GB8898-2011, GB12113,

GB4943.1-2011, IEC60065, IEC60590), flat-panel solar module safety certification standard (UL1703), photovoltaic DC grounding resistance standard (IEC61730-1), etc.