RK9715/ RK9715B Electronic Load


Description

Parameter

Accessories

Product Introduction
RK97_series Programmable DC Electronic Load Use The High Performance Chip,Design According To High Precision,Has Novel Appearance,Scientific And Strict Production Process,Compared With Similar Products,It Is More Cost-Effective.

Application Area
Electronic Load Is Widely Used In The Production Line Of Electronic Products(Such As Mobile Phone Charger,Mobile Phone Batteries,Electric Vehicle Batteries,Battery Switch,Linear Battery),Scientific Research Institutions,Automotive Electronics,Aerospace,Ship,Solar Cells,Fuel Cells And Other Industries.

Performance Characteristics
High Brightness VFD Display Screen,Display Clear.
The Circuit Parameters Are Corrected By Software And The Work Is Stable And Reliable Without The Use Of Adjustable Resistance.
Over Current,Over Voltage,Over Power,Over Heat,Reverse Polarity Protection.
Intelligent Fan System,Can Change According To The Temperature,Start Or Stop Automatically, And Adjust The Wind Speed.
Support External Trigger Input,Cooperate With External Equipment,Complete Automatic Detection.
After The Test Is Completed,The Trigger Signal Can Be Output To The External Device.
The Output Terminal Of The Current Waveform Can Be Provided,And The Current Waveform Can Be Observed Through The External Oscilloscope.
Support Remote Port Voltage Compensating Input Terminal.
Support Multiple Test Functions


  • Previous:
  • Next:

  • Model RK9715 RK9715B
    Rated Input Voltage 0~150V 0~500V
    Current 0~240A 0~120A
    Power 1800W
    Constant Voltage Mode
     
    Range 0~20V 0~150V 0~20V 0~500V
    Resolution 1mV 10mV 1mV 10mV
    Accuracy 0.03%+0.02%FS 0.03%+0.05%FS
    Constant Current Mode
     
    Range 0~20A 0~120A 0~3A 0~30A
    Resolution 1mV 10mV 1mV 10mV
    Accuracy 0.05%+0.05%FS 0.1%+0.05%FS 0.03%+0.05%FS 0.03%+0.05%FS
    Constant Power Mode Range 1800W
    Resolution 1mW 10mW 1mW 10mW
    Accuracy 0.1%+0.1%FS
    Constant Resistance Mode Range 0-10KΩ
    Resolution 16 Bits
    Accuracy 0.1%+0.1%FS
    Exterior Dimension 480×140×535mm
    Accessory Power Supply Line
    Model Picture Type  
    RK00001 Standard  Power Cord
    Warranty Card Standard  
    Manual     Standard  
    RK85001 Optional  Communication Software
    RK85002 Optional   Communication Module   
    RK20K          Optional Data Link Line
  • Write your message here and send it to us
    Copyright © 2021 Shenzhen Meiruike Electronic Technology Co., Ltd. Featured Products, Sitemap, High Voltage Meter, 1000v- 40kv Digital Meter, Voltage Meter, High Voltage Calibration Meter, High-Voltage Digital Meter, Digital High Voltage Meter, All Products